RUSHFPV GNSS Micro M10 GPS Module 10HZ Rate Built-in Ceramic Antenna for RC FPV Freestyle Drone DIY Parts
Veilig betalen

Gratis Cadeau
Welkom bij Roymall, uw professionele cadeauwinkel. Wij waarderen uw steun en bieden als dank een gratis cadeau bij elke aankoop. Klaar om onze collectie te ontdekken? Blader door onze selectie, plaats uw bestelling en ontvang uw gratis cadeau.Verzendbeleid
Bestellingen worden binnen 2 werkdagen verwerkt. Bestellingen in het weekend worden de volgende werkdag verwerkt.Normale levertijd is 5-7 werkdagen.Levertijd kan variëren afhankelijk van bestemming.1. Retourbeleid
Wij accepteren alleen retouren van artikelen gekocht via roymall.com. Gratis cadeaus kunnen niet worden geretourneerd. Artikelen moeten ongebruikt en in originele verpakking zijn.Retouren worden binnen 3-5 werkdagen verwerkt na ontvangst.Aangepaste artikelen kunnen niet worden geretourneerd.Neem contact op: service@roymall.com of Whatsapp: +86193598494712.Restitutiebeleid
Volledige restitutie na ontvangst en controle. Verzendkosten worden niet terugbetaald.Neem contact op: service@roymall.com of Whatsapp: +8619359849471Compact navigation module designed for small FPV UAVs.
The new M10 engine supports GPS, BDS, GLONASS and GALILEO navigation systems and can be connected to three of them at the same time.
Refresh rates up to 10 Hz.
Built-in backup battery and storage, supports fast hot start.
Ceramic antenna with anti-fouling coating and sealed circuitry for reliability and durability.
Parameters:
Receiving bands: GPSL1, GLONASSL1, BDS B1, GALILEOE1, SBAS L1, QZSS L1
Receive channel:72 CH
Receiving Sensitivity:-1 62dBm
Output protocol:UBX
Baud rate:115200dps
Output refresh rate:1HZ-10Hz
Power input:5V30mA
Speed accuracy:0.05m/s
Positioning accuracy:2DACC1.5m
Maximum working height:50,000m
Maximum moving speed:500m/s
Size:12x15x4.8mm
Weight:2.4g
Precautions
Please keep the ceramic antenna without obstruction above, avoid near metal and carbon fiber. To get the best reception, please make Mount the GNSS antenna with a bracket in the clear space and as far away as possible from VTX and R/C receiver antennas.
When connecting to the flight control, please connect the RX of GNSS module to the TX of the flight control and the TX of the module to the RX of the flight control.
The antenna is fragile, please do not hit it.
The engraving marks on the ceramic antenna are for improving the performance of the antenna by manual fine-tuning of the center frequency, not a product defect.
Package List
1x GPS Module
1x SH1.04pin Silicone cable