HSKRC MAK4 7 Inch 295mm Carbon Fiber Frame Kit 5mm Arm Thickness for DIY Long Range RC FPV Racing Drone
Direct purchase from the factory 
Veilig betalen
Gratis cadeau
Verzendbeleid
RetourbeleidGratis Cadeau
Welkom bij Roymall, uw professionele cadeauwinkel. Wij waarderen uw steun en bieden als dank een gratis cadeau bij elke aankoop. Klaar om onze collectie te ontdekken? Blader door onze selectie, plaats uw bestelling en ontvang uw gratis cadeau.Verzendbeleid
Bestellingen worden binnen 2 werkdagen verwerkt. Bestellingen in het weekend worden de volgende werkdag verwerkt.Normale levertijd is 5-7 werkdagen.Levertijd kan variëren afhankelijk van bestemming.1. Retourbeleid
Wij accepteren alleen retouren van artikelen gekocht via roymall.com. Gratis cadeaus kunnen niet worden geretourneerd. Artikelen moeten ongebruikt en in originele verpakking zijn.Retouren worden binnen 3-5 werkdagen verwerkt na ontvangst.Aangepaste artikelen kunnen niet worden geretourneerd.Neem contact op: service@roymall.com of Whatsapp: +86193598494712.Restitutiebeleid
Volledige restitutie na ontvangst en controle. Verzendkosten worden niet terugbetaald.Neem contact op: service@roymall.com of Whatsapp: +8619359849471Specifications:
Brand name: HSKRC
Model: MAK4
Item name: 295mm wheelbase Carbon Fiber Frame Kit
Color: Red/Grey/Blue
Wheelbase:295mm
Arm thickness: 5MM
Upper center board: 2.5MM
Lower center plate: 2.5MM
Camera Mount Width: 19mm
Camera protection frame board thickness: 2MM
Plywood thickness: 2MM
Size: 193*223MM
weight: about 128g
Recommended configuration(not included):
Flight control: 20x20mm 30.5x30.5mm F4/F405/F722
Motor:2306/2806.5/2806
ESC: 35A-60A Split/4-in-1
Battery: 4S 1800mAh ~ 6S 2200mAh
Propeller: supports up to 7 inches (7040)
GPS: BN220 (22x20x6mm)
The following Parts are compatible:( NOT Included)
Features:
-Flight is smooth and FPV shooting is easier and more elegant.
-H-shaped structure does not affect the flying experience at all. On the contrary, compared with the X-shaped structure, the arm is shorter and lighter. At the same time, the arm strength is higher.
-The H-shaped layout has more installation space in the middle section of the cabin and a lower center of gravity, making the flight more stable.
-The installation size of the FPV lens is 19mm wide
-Flight control installation positions with two hole spacings of 30.5*30.5 and 20*20 are reserved at the front and rear of the cabin. Suitable for the installation of a variety of flight control equipment.
-Fixed motor mounting hole spacing: 16*16/16*19/19*19mm are compatible.
-The corners of the entire machine are chamfered to create a fine workmanship and reasonable structure. Of course, there are also customized thickened aluminum tubes to ensure the strength of the frame.
Package Included:
1x Frame Kit
1x Set of 3D Printed Parts
