English | 日本語 | Deutsch | Español | Русский | Français | بالعربية
Select Currency Dropdown Arrow
Selecteer taal Dropdown Arrow
Home>mall>Electronics
0Leuk gevonden

DC 9V SMT Soldering Test Kit Electronic Practice Set

4.1
★★★★★
54
$8.99 /$10.97
  • Direct purchase from the factory

    • *Name:

    • *Email:

    • *Phone:

    • *Quantity:

    • *Content:

    • Attachment:

      Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

    $4.99 /$10.97
    -+

    Veilig betalen

    Gratis cadeau
    Gratis cadeau bij elke aankoop
    Verzendbeleid
    Gratis verzending vanaf $9.9
    Retourbeleid
    Retouren worden geaccepteerd binnen 40 dagen na ontvangst. Aangepaste artikelen kunnen niet worden geretourneerd. Artikelen gekocht met een cadeaubon kunnen alleen worden omgeruild.

    Gratis Cadeau

    Welkom bij Roymall, uw professionele cadeauwinkel. Wij waarderen uw steun en bieden als dank een gratis cadeau bij elke aankoop. Klaar om onze collectie te ontdekken? Blader door onze selectie, plaats uw bestelling en ontvang uw gratis cadeau.

    Verzendbeleid

    Bestellingen worden binnen 2 werkdagen verwerkt. Bestellingen in het weekend worden de volgende werkdag verwerkt.Normale levertijd is 5-7 werkdagen.Levertijd kan variëren afhankelijk van bestemming.

    1. Retourbeleid

    Wij accepteren alleen retouren van artikelen gekocht via roymall.com. Gratis cadeaus kunnen niet worden geretourneerd. Artikelen moeten ongebruikt en in originele verpakking zijn.Retouren worden binnen 3-5 werkdagen verwerkt na ontvangst.Aangepaste artikelen kunnen niet worden geretourneerd.Neem contact op: service@roymall.com of Whatsapp: +8619359849471

    2.Restitutiebeleid

    Volledige restitutie na ontvangst en controle. Verzendkosten worden niet terugbetaald.Neem contact op: service@roymall.com of Whatsapp: +8619359849471
    {"code":"00","result":"
    Description:

    1. J1 and J2 are the power supply input terminals of the entire SMT board. It can work normally when connected to AC6V or DC9V. When working normally, all LED lights in this kit can work normally. At first, each group of LEDs flashes with water, and then flashes at intervals, and finally all Light up all the LEDs, then flash again, and cycle like this to check whether the LEDs are working and whether they are soldered well. If it is found that the corresponding LED does not flicker, it means that there is a welding error or a false welding.
    2. The AC6V power supply is rectified by D1-D4 diodes, and then through each filter capacitor to pin 1 of the voltage regulator chip 78M05 (LED97 is always on, the rectifier circuit is working normally), and the output of DC5V is supplied to the whole test circuit through pin 3.
    3. This test circuit is controlled by a single-chip microcomputer to work with 12 groups of 8-bit LED lights. Each group is composed of 1 74HC573 and 74HC164. One group can control 8 LEDs, 12 groups in total. Figure 1 is the control schematic diagram of one group. When working normally, all LED lights are on and can flash.


    Specifications:

    Product Name: SMD Soldering Test Kit
    PCB material: FR-4PCB board
    PCB size: 145*100MM
    patch tape connection test
    Power supply mode: DC DC9V
    Applicable objects: junior welding patch personnel
    Component Description: Common patch components are used


    Products related to this item
    Loading related products...
    ❮
    ❯
    Electronics Ranking
    More Electronics
    Description:

    1. J1 and J2 are the power supply input terminals of the entire SMT board. It can work normally when connected to AC6V or DC9V. When working normally, all LED lights in this kit can work normally. At first, each group of LEDs flashes with water, and then flashes at intervals, and finally all Light up all the LEDs, then flash again, and cycle like this to check whether the LEDs are working and whether they are soldered well. If it is found that the corresponding LED does not flicker, it means that there is a welding error or a false welding.n
    2. The AC6V power supply is rectified by D1-D4 diodes, and then through each filter capacitor to pin 1 of the voltage regulator chip 78M05 (LED97 is always on, the rectifier circuit is working normally), and the output of DC5V is supplied to the whole test circuit through pin 3.n
    3. This test circuit is controlled by a single-chip microcomputer to work with 12 groups of 8-bit LED lights. Each group is composed of 1 74HC573 and 74HC164. One group can control 8 LEDs, 12 groups in total. Figure 1 is the control schematic diagram of one group. When working normally, all LED lights are on and can flash.


    Specifications:

    Product Name: SMD Soldering Test Kit
    PCB material: FR-4PCB board
    PCB size: 145*100MM
    patch tape connection test
    Power supply mode: DC DC9V
    Applicable objects: junior welding patch personnel
    Component Description: Common patch components are used